Futtura EG2 Series Machine Control

• EG2 Control box
• EG Series Receiver
• Complete Cable Set and Basic Remote Switch
• 10-bit Blade Sensor

_________________________

The EG2-D makes grading to tight tolerances a breeze. The dual 360-degree dual receivers give maximum laser reception and the system is accurate down to 2mm. The ability to change “on-grade” on the fly makes the system a favorite with operators. The EG2-D is an excellent choice for fine grading for concrete slabs on commercial sites as well as residential sites.

EG2-D Kit Includes:

• EG2 Control Box
• EG Series Receivers (2)
• EG2 Accessories (dual)

_________________________

The EG2-DS makes grading to tight tolerances a breeze. The dual 360-degree dual receivers give maximum laser reception and the system is accurate down to 2mm. It can also be configured as a single laser receiver for elevation control and a slope sensor for blade slope control. That way you have laser accuracy for elevation work and accurate blade slope for sloping drainage work. The ability to change “on-grade” on the fly makes the system a favorite with operators. The EG2-DS is an excellent choice for fine-grading for concrete slabs on commercial sites as well as residential sites.  Note: This system can only be configured as a dual receiver system or a single receiver and slope sensor. Only two of the three components can be used at one time.

EG2-DS Kit Includes:

• EG2 Control Box
• EG Series Receivers (2)
• EG2 Accessories (dual)
• 10-bit Blade Sensor

___________________________

Side Mount Clips

Side mount clips allow the EG2 receiver to mount to a mast and slide up and down for adjustment instead of mounting on top of the mast.

Hitchdoc 14-Pin Cable

This is the skid-steer cable with a 14-pin connector to the Hitchdoc Box Blade unit.  It is for customers who want to do their own pinouts.  The Pinout PDF is located in the Specifications tab.

Premium Remote Switch

This is the switch mounts inside the cab of the skid steer so that the operator can raise and lower the blade from inside the cab and also switch the unit from auto to manual